Dispose of packaging materials carefully and keep them well away Page 5: Installing Remove the polystyrene block After removing the packaging from the machine, make sure that the polystyrene block figure 1 has come away from the underside of the machine, with the polystyrene base. If it has not come away, carefully lower the machine on its side onto the polystyrene top cap and then remove the polystyrene block see figure 2.
Page 6 2. Remove the transit fixings There are two transit bolts fitted under plastic covers, one at either side of the rear of your machine. These bolts prevent damage to the machine while it is being transported. Remove both transit bolts complete with spacers, by Location of transit following the instructions below. Page 7 Changing the mains lead If you have damaged the existing lead and need a new one, contact Hotpoint Service UK on or www. A charge will be made. We strongly advise that fitting the new lead is carried out by a qualified electrician.
Page 8: Connect To Water Supply see figure 2. A cold fill adaptor figure 3 and fitting instructions are available from your local Hotpoint authorised Service Centre or by calling the Genuine Parts and Accessories Mail Order Hotline UK on or www. Page 9 5. Connect the machine to a drainage system Take care when you remove the drain hose from the clips on the back of the machine.
All machines are tested with water before they leave the factory so a small amount of water may still be in the hose. Page Adjust The Feet 6. Move the machine into position Your machine is heavy so care must be taken when moving it.
Page Using Your Machine Using your machine The rest of this instruction book will help you to make the most of your new washing machine. We have created the machine for the way you live, by listening to people just like you who use our products. You will find that your new machine has many useful features and is easy to use. Do not overload the machine!
It may damage laundry and reduce the quality of the wash. Do not try to open the door when the door indicator light is on. We have set the detergent retaining flap, in the main detergent compartment to dispense powder detergent only. Drawer release latch Prewash detergent compartment. Wash Programme label Universal Pre-wash Programme Mixed Wash Programmes White cotton and linen without special finishes Colourfast cotton linen or viscose without special finishes Non-colourfast cotton, linen or viscose Non-colourfast cotton, linen or viscose Synthetics Page 17 Choosing an option button To choose an option, press the button and you will see a light come on above the button.
Press again to cancel, and the light will go out. You cannot alter the options once the machine is running. Time Saver Page Automatic Features Automatic Features Auto half load Auto half load saves you time and money when washing smaller loads.
Water levels are automatically adjusted to cater for the different loads. Unbalanced load warning Your machine has an inbuilt feature to prevent it spinning with an unbalanced load.
South Planning. North Planning. SSR Team. Pre Order POP. Multibrand Team. Emit Helpdesk. Go back. Book a repair. Please select your appliance. Select Select. Welcome to Hotpoint Service Please select your appliance. Select Laundry. Select Dishwashers. Select Cooling. Select Cooking. Back to appliance category. Washing Machine. Select Washing Machine. Washer Dryer. Select Washer Dryer. Tumble Dryer. Select Tumble Dryer. Select Dishwasher. Integrated Dishwasher.
0コメント